Fujitsu DX60 Manual de usuario descargar pdf (Pagina 61)

Chapter 5 Installing Optional Products

5.1 Installing Disks

ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-

4 Install the new disk.

4-1 Press the catch on the disk lock lever to unlock it.

4-2 Insert the disk all the way into in the slot, making sure that it is firmly seated and

keeping the lock lever open.

4-3 Swing the lock lever in the direction of the arrow, until the lock clicks shut.

4-4 Check that the newly installed disk's DISK READY LED lights up green after

approximately 30 seconds.

5 Repeat Step 3 and Step 4 for each additional disk.

6 If a wrist strap is used, remove the wrist strap.

7 On the Storage System Status screen of ETERNUS Web GUI, check that the

added disks have been recognized.

IMPORTANT

Hold the disk with both hands to protect against jarring.

Catch

Lock lever

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 121 122

Sin comentarios

Fujitsu DX60 Manual de usuario Pagina 61