Fujitsu PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Manual de usuario Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 93
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
2. Delete the LinkAggregation Group
- Solaris 10 8/07 or later
The following example shows how to delete the "key=1" LinkAggregation Group (*3):
# /usr/sbin/dladm delete-aggr 1
*3: Before deleting the LinkAggregation Group, please inactivate the LinkAggregation Group and stop the LinkAggregation.
- Solaris 11
The following example shows how to delete the "aggr-link=aggr1" LinkAggregation Group (*4):
# /usr/sbin/dladm delete-aggr aggr1
*4: Before deleting the LinkAggregation Group, please inactivate the LinkAggregation Group and stop the LinkAggregation.
Note
- After rebooting the system, the LinkAggregation settings remain effective.
- For more information about this command, please refer to the "man pages section 1M: System Administration Commands" of Oracle
Documentation.
4.2.1.3 Modify a LinkAggregation (dladm modify-aggr)
This section explains the dladm modify-aggr command for modifying LinkAggregation.
- Synopsis
- Solaris 10 8/07 or later
/usr/sbin/dladm modify-aggr [-P policy] [-l mode] [-T time] key
-P policy: Specify the policy (Data Distribution Mode). Policies can be combined as needed
L2: Distribution by MAC header
L3: Distribution by IP header
L4: Distribution by ULP (TCP, UDP, etc) header
-l mode: Specify the LACP mode
active: active mode
passive: passive mode
off: off mode
-T time: Specify the LACP timer
short: every one second
long: every 30 seconds
key: Specify the key number to identify the LinkAggregation Group
Specify a number ranging from 1 to 999.
- Solaris 11
/usr/sbin/dladm modify-aggr [-P policy] [-L mode] [-T time] aggr-link
-P policy: Specify the policy (Data Distribution Mode). Policies can be combined as needed
L2: Distribution by MAC header
L3: Distribution by IP header
L4: Distribution by ULP (TCP, UDP, etc) header
-L mode: Specify the LACP mode
active: active mode
- 48 -
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 92 93

Comentarios a estos manuales

Sin comentarios