Fujitsu PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Manual de usuario descargar pdf (Pagina 57)

- Solaris 10 8/07 or later

- The following example shows how to add the interface "fjgi3" to the "key=1" LinkAggregation Group:

# /usr/sbin/dladm add-aggr -d fjgi3 1

- Solaris 11

- The following example shows how to add the interface "fjgi3"(this vanity name is net5) to the "agg-link=aggr1" LinkAggregation

Group:

# /usr/sbin/dladm add-aggr -l net5 aggr1

Note

- If the LACP mode is off, do not use this command.

- After rebooting the system, the LinkAggregation settings remain effective.

- For more information about this command, please refer to the "man pages section 1M: System Administration Commands" of Oracle

Documentation.

4.2.1.5 Remove Interfaces from a LinkAggregation (dladm remove-aggr)

This section explains the dladm remove-aggr command for removing interfaces from a LinkAggregation.

- 51 -

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 92 93

Sin comentarios

Fujitsu PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Manual de usuario Pagina 57