Fujitsu Solaris PCI GigabitEthernet 3.0 Manual de usuario descargar pdf (Pagina 59)

Chapter 4 LinkAggregation Feature

● The /etc/hostname.fjgiXX (XX: instance number) file is required for the

aggregator-interface only (in the above example, /etc/hostname.fjgi1 is required).

The LinkAggregation group defined in the configuration file is activated by

rebooting the system.

4.2.2 Using the /etc/opt/FJSVla/bin/fjla Command

The fjla command has the following functions.

●

Activate a LinkAggregation Group (fjla init)

● Inactivate LinkAggregation Group (fjla term)

●

Display status and statistics (fjla stat)

4.2.2.1 Activate a LinkAggregation Group (fjla init)

This section explains the fjla init command for activating a LinkAggregation group.

- Synopsis

/etc/opt/FJSVla/bin/fjla init

aggregator-interface

member-instance

]

distribution-mode

aggregator-interface

: Aggregator-interface name (including instance number)

member-instance

: Instance numbers of member interfaces

distribution-mode

: Distribution mode used by the LinkAggregation group. One of the

following values must be specified:

1: Destination MAC address distribution

2: Destination IP address distribution

3: Source/Destination IP address distribution

- Description

Configure and activate the LinkAggregation group. All VLAN interfaces associated with the

aggregator-interface will be automatically configured in the group.

- Exit code

0 : normal end.

>0 : error end.

- Example

Configure and activate the LinkAggregation group with the following:

Aggregator-interface: fjgi0

Member-instance: fjgi1 fjgi2

Distribution-mode: Source/Destination IP address distribution

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 114 115

Sin comentarios

Fujitsu Solaris PCI GigabitEthernet 3.0 Manual de usuario Pagina 59