Fujitsu Solaris PCI GigabitEthernet 3.0 Manual de usuario Pagina 79

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 115
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 78
Appendix C Using GigabitEthernet in a Cluster Environment
C.3 Notes
SynfinityCluster 2.0 or later or PRIMECLUSTER 4.1 or later is required when using
the FUJITSU PCI GigabitEthernet interface. If an earlier version of cluster software
is used, GigabitEthernet cannot be used as the private LAN or for IP address fail-over
on a public LAN.
When using a FUJITSU PCI GigabitEthernet interface as a SynfinityCluster private
LAN or as the PRIMECLUSTER cluster interconnect, execute the following command
before setting up the cluster (example: fjgi0).
# ifconfig fjgi0 plumb
A FUJITSU PCI GigabitEthernet interface used as a VLAN interface cannot be used for
the private LAN or the cluster interconnect.
72
Vista de pagina 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 114 115

Comentarios a estos manuales

Sin comentarios