Fujitsu SPARC T5440 Manual de usuario descargar pdf (Pagina 92)

70 SPARC Enterprise T5440 Server Service Manual • June 2011

▼ Extend the Server to the Maintenance Position

1. (Optional) Use the set /SYS/LOCATE command from the -> prompt to locate

the system that requires maintenance.

Once you have located the server, press the Locator LED and button to turn it off.

2. Verify that no cables will be damaged or will interfere when the server is

extended.

Although the cable management arm (CMA) that is supplied with the server is

hinged to accommodate extending the server, you should ensure that all cables

and cords are capable of extending.

3. From the front of the server, release the two slide release latches (FIGURE:

Extending the Server Into the Maintenance Position on page 70).

Squeeze the slide rail locks to release the slide rails.

FIGURE: Extending the Server Into the Maintenance Position

-> set /SYS/LOCATE value=Fast_Blink

Figure Legend

1 Slide Rail Lock

2 Inner Rail Release Button

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 211 212

Sin comentarios

Fujitsu SPARC T5440 Manual de usuario Pagina 92