Fujitsu SPARC ENTERPRISE M4000 Manual de usuario

viii XSCF Reference Manual • November 2007showhttps 398showldap 402showlocale 404showlocator 406showlogs 408showlookup 424showmonitorlog 426sho

ioxadm(8)92 XSCF Reference Manual • Last Revised January 2007Specifies the target device which can be a downlink card in a host slot, anExternal I/O E

ioxadm(8)System Administration 93EXAMPLES EXAMPLE 1 DisplayingTemperature,Voltage,Current,andFanspeedSensorReadingsEXAMPLE 2 Display All Sensor Readin

ioxadm(8)94 XSCF Reference Manual • Last Revised January 2007In EXAMPLE 3,thelist command is used to display the connections betweenExternal I/O Expan

ioxadm(8)System Administration 95EXAMPLE 9 Enabling the Indicator for Power Supply 1 When Power Supply 1 Has aFault IndicationThe External I/O Expansi

ioxadm(8)96 XSCF Reference Manual • Last Revised January 2007

man(1)System Administration 97NAME man - display manual pages of specified XSCF shell commandSYNOPSIS man command_name ...man -hDESCRIPTION man(1) dis

man(1)98 XSCF Reference Manual • Last Revised January 2007EXIT STATUS The following exit values are returned:0 Successful completion>0 An error occ

moveboard(8)System Administration 101NAME moveboard - move an eXtended System Board (XSB) from the current domain toanotherSYNOPSIS moveboard [[-q] -{

moveboard(8)102 XSCF Reference Manual • Last Revised June 2007OPTIONS The following options are supported:-c assign Disconnects a configured XSB from

moveboard(8)System Administration 103OPERANDS The following operand is supported:EXTENDEDDESCRIPTION When the command is executed, a prompt to confir

Preface ixPrefaceThis manual describes how to use the shell command which can be executed in theeXtended System Control Facility (hereinafter referred

moveboard(8)104 XSCF Reference Manual • Last Revised June 2007EXAMPLE 2 Reserves assignment of the XSB#00-0 to the domain ID 1.EXIT STATUS The followi

nslookup(8)System Administration 107NAME nslookup - refer to the DNS server for the hostSYNOPSIS nslookup hostnamenslookup -hDESCRIPTION nslookup(8) r

nslookup(8)108 XSCF Reference Manual • Last Revised January 2007

password(8)System Administration 109NAME password - manage user passwords and expiration settingsSYNOPSIS password [-e days| date|Never][-i inactive][

password(8)110 XSCF Reference Manual • Last Revised November 2007OPTIONS The following options are supportedOPERANDS The following operands are suppor

password(8)System Administration 111EXAMPLES EXAMPLE 1 Enabling Password Until February 2, 2008EXAMPLE 2 Set Password Lock 10 Days After Password Expi

password(8)112 XSCF Reference Manual • Last Revised November 2007

poweroff(8)System Administration 113NAME poweroff - turn off the power to the specified domainSYNOPSIS poweroff [[-q] -{y|n}][-f][-M] -d domain_idpowe

poweroff(8)114 XSCF Reference Manual • Last Revised January 2007 If the operating system of the target domain is running, the poweroff(8)command proc

poweroff(8)System Administration 115EXAMPLE 3 Turns off power to domains with domain IDs 1. An error occurs because theuser has no control privilege.E

x XSCF Reference Manual • November 2007AudienceThis manual is intended for users, who administrate SPARC Enterprise M4000/M5000/M8000/M9000 servers (h

poweroff(8)116 XSCF Reference Manual • Last Revised January 2007EXAMPLE 9 Cancels the poweroff(8) command execution that is in progress. Automati-call

poweron(8)System Administration 119NAME poweron - turn on the power to the specified domainSYNOPSIS poweron [[-q] -{y|n}][-M] -d domain_idpoweron [[-q

poweron(8)120 XSCF Reference Manual • Last Revised January 2007 When the poweron(8) command is executed, power-on results for each of thespecified do

poweron(8)System Administration 121EXAMPLE 5 Cancels the poweron(8) command execution that is in progress.EXAMPLE 6 Cancels the poweron(8) command exe

poweron(8)122 XSCF Reference Manual • Last Revised January 2007

prtfru(8)System Administration 123NAME prtfru - display FRUID data on the system and External I/O Expansion UnitSYNOPSIS prtfru [-c][-l][-M][-x][conta

prtfru(8)124 XSCF Reference Manual • Last Revised January 2007EXAMPLES EXAMPLE 1 Displaying FRU Tree HierarchyEXAMPLE 2 Displaying System-Board FRU ID

prtfru(8)System Administration 125EXAMPLE 4 Displaying Power Supply FRU ID DataEXAMPLE 5 Displaying Memory Module FRU ID DataEXIT STATUS The following

prtfru(8)126 XSCF Reference Manual • Last Revised January 2007

rebootxscf(8)System Administration 127NAME rebootxscf - reset the XSCFSYNOPSIS rebootxscf [[-q] -{y|n}]rebootxscf -hDESCRIPTION The rebootxscf(8) comm

Preface xiEach XSCF shell command is described in the order of sections below. When there's norelevant description provided, the section itself i

rebootxscf(8)128 XSCF Reference Manual • Last Revised June 2007EXIT STATUS The following exit values are returned:SEE ALSO applynetwork(8), setdate(8)

replacefru(8)System Administration 131NAME replacefru - replace a field replaceable unit (FRU)SYNOPSIS replacefrureplacefru -hDESCRIPTION The replacef

replacefru(8)132 XSCF Reference Manual • Last Revised January 2007

reset(8)System Administration 133NAME reset - reset the specified domainSYNOPSIS reset [[-q] -{y|n}] -d domain_id levelreset -hDESCRIPTIONNote – Since

reset(8)134 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operand is supported:EXTENDEDDESCRIPTION When the command is exec

reset(8)System Administration 135EXAMPLE 4 Cancels the reset command execution that is in progress.EXIT STATUS The following exit values are returned:

reset(8)136 XSCF Reference Manual • Last Revised January 2007

resetdateoffset(8)System Administration 137NAME resetdateoffset - reset the time subtraction between XSCF and the domainSYNOPSIS resetdateoffsetresetd

resetdateoffset(8)138 XSCF Reference Manual • Last Revised January 2007

sendbreak(8)System Administration 139NAME sendbreak - send a break signal to the specified domainSYNOPSIS sendbreak -d domain_idsendbreak [[-q] -{y|n}

xii XSCF Reference Manual • November 2007SPARC Enterprise Mx000 ServersDocumentationThe manuals listed below are provided for reference.OPERANDS This

sendbreak(8)140 XSCF Reference Manual • Last Revised June 2007

setaltitude(8)System Administration 141NAME setaltitude - set the altitude of the systemSYNOPSIS setaltitude -s key=valuesetaltitude -hDESCRIPTION The

setaltitude(8)142 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Sets thealtitude ofthe systemto 200 m. The specified value is rounded upt

setarchiving(8)System Administration 145NAME setarchiving - configure the log archiving functionalitySYNOPSIS setarchiving [-k host-key][-l audit-limi

setarchiving(8)146 XSCF Reference Manual • Last Revised January 2007OPTIONS The following options are supported:-h Displays usage statement.When used

setarchiving(8)System Administration 147-l audit-limit,non-audit-limit Sets the space limits for log archives in megabytes.The option argument must co

setarchiving(8)148 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operands are supported:EXAMPLESEXAMPLE 1 Setting the Archiv

setaudit(8)System Administration 151NAME setaudit - manage the system auditing functionalitySYNOPSIS setaudit enable|disable|archive|deletesetaudit [-

setaudit(8)152 XSCF Reference Manual • Last Revised June 2007OPTIONS The following options are supported.-a users=enable|disable|defaultSets the audit

setaudit(8)System Administration 153-e events = enable|disableChanges the audit record generation policy for the specified audit events.events is a co

Preface xiiiNote – "x" in the order number is the version number of the manual.1. Manuals on the WebThe latest versions of all the SPARC Ent

setaudit(8)154 XSCF Reference Manual • Last Revised June 2007OPERANDS The following operands are supported:EXAMPLESEXAMPLE 1 Changing Classes Using Na

setaudit(8)System Administration 155Auditing is enabled for all of Class 1 (SYSTEM) except for event 64 (USER) isdisabled.EXAMPLE 4 Enabling AuditingT

setaudit(8)156 XSCF Reference Manual • Last Revised June 2007

setautologout(8)System Administration 157NAME setautologout - set the session timeout time of the XSCF shellSYNOPSIS setautologout -s timeoutsetautolo

setautologout(8)158 XSCF Reference Manual • Last Revised January 2007

setcod(8)System Administration 159NAME setcod - set up the Capacity on Demand (COD) resources used for domainsSYNOPSIS setcodsetcod [-v]setcod [[-q] -

setcod(8)160 XSCF Reference Manual • Last Revised June 2007OPERANDS The following operands are supported:EXTENDEDDESCRIPTIONIf you run the setcod comm

setcod(8)System Administration 161After this command completes, you will see a message similar to this one in theXSCF console:EXAMPLE 3 Set the COD He

setcod(8)162 XSCF Reference Manual • Last Revised June 2007

setdate(8)System Administration 163NAME setdate - set the date and time of XSCFSYNOPSIS setdate [[-q] -{y|n}][-u] -s datesetdate -hDESCRIPTION The set

xiv XSCF Reference Manual • November 2007Man page of the XSCFNote – The man page can be referenced on the XSCF Shell, and it provides the samecontent

setdate(8)164 XSCF Reference Manual • Last Revised June 2007 The ntpdate(1M) command is executed in the domain. Rebooting the domain The setdate(8)

setdate(8)System Administration 165SEE ALSO setntp(8), settimezone(8), showdate(8), showntp(8), showtimezone(8)

setdate(8)166 XSCF Reference Manual • Last Revised June 2007

setdcl(8)System Administration 167NAME setdcl - set a domain component list (DCL)SYNOPSIS setdcl -d domain_id -s policy=valuesetdcl -d domain_id -s op

setdcl(8)168 XSCF Reference Manual • Last Revised January 2007 Whether to set a priority for the specified LSB as a floating board, relative toother

setdcl(8)System Administration 169-r Clears the XSB number associated with an LSB number in thespecified domain.-s option=value Makes settings regardi

setdcl(8)170 XSCF Reference Manual • Last Revised January 2007-r Clears the XSB number associated with an LSB number in thespecified domain.-s option=

setdcl(8)System Administration 171OPERANDS The following operands are supported:EXTENDEDDESCRIPTION If the XSB associated with the specified LSB has

setdcl(8)172 XSCF Reference Manual • Last Revised January 2007EXAMPLE 4 Clear the XSBs associated with LSB#00 and #01 of domain ID 0.EXIT STATUS The f

setdomainmode(8)System Administration 173NAME setdomainmode - set a domain modeSYNOPSIS setdomainmode [[-q] -{y|n}] -d domain_id -m function=modesetdo

Preface xvAbbreviated References to OtherDocumentsIn this manual, the following abbreviated titles may be used when referring to asystems manual. The

setdomainmode(8)174 XSCF Reference Manual • Last Revised June 2007OPTIONS The following options are supported:EXTENDEDDESCRIPTION When the command is

setdomainmode(8)System Administration 175 When the OpenBoot PROM environmental variable 'auto-boot?' has been setto false, the auto boot fu

setdomainmode(8)176 XSCF Reference Manual • Last Revised June 2007EXIT STATUS The following exit values are returned:SEE ALSO showdomainmode(8)0 Succe

setdomparam(8)System Administration 179NAME setdomparam - forcibly rewrite OpenBoot PROM environment variablesSYNOPSIS setdomparam [[-q] -{y|n}] -d do

setdomparam(8)180 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operands are supported:EXTENDEDDESCRIPTIONWhen the command i

setdscp(8)System Administration 183NAME setdscp - set the IP address assignments for the Domain to Service ProcessorCommunications Protocol (DSCP)SYNO

setdscp(8)184 XSCF Reference Manual • Last Revised January 2007Note – The -y and -n options can be used (with or without the -q option) whenrunning se

setdscp(8)System Administration 185EXAMPLE 1 Assigning All DSCP AddressesEXAMPLE 2 Assigning an Alternative IP address to Domain 1EXAMPLE 3 Specifying

setdscp(8)186 XSCF Reference Manual • Last Revised January 2007EXIT STATUS The following exit values are returned:SEE ALSO showdscp(8)0 Successful com

setdualpowerfeed(8)System Administration 189NAME setdualpowerfeed - set dual power feed modeSYNOPSIS setdualpowerfeed -s keysetdualpowerfeed -hDESCRIP

xvi XSCF Reference Manual • November 2007Prompt NotationsThe following prompt notations are used in the manual.Shell Prompt NotationsXSCF XSCF>C sh

setdualpowerfeed(8)190 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Enablesdualpowerfeedmodeinthesystem.Beforerebootingthesystem,a messa

setemailreport(8)System Administration 193NAME setemailreport - set up the email report configuration dataSYNOPSIS setemailreport [-v][-t]setemailrepo

setemailreport(8)194 XSCF Reference Manual • Last Revised January 2007OPTIONS The following options are supported:EXAMPLESEXAMPLE 1 Enable Email Repor

setemailreport(8)System Administration 195EXAMPLE 5 Sending Test EmailEXIT STATUS The following exit values are returned:SEE ALSO setsmtp(8), showemai

setemailreport(8)196 XSCF Reference Manual • Last Revised January 2007

sethostname(8)System Administration 197NAME sethostname - set a host name and a DNS domain name for an XSCF unitSYNOPSIS sethostname xscfu hostnameset

sethostname(8)198 XSCF Reference Manual • Last Revised June 2007EXTENDEDDESCRIPTION To reflect the host name and the DNS domain name to XSCF, execute

sethttps(8)System Administration 201NAME sethttps - start or stop the HTTPS service, which is used in the XSCF network. Thiscommand also performs auth

sethttps(8)202 XSCF Reference Manual • Last Revised January 2007OPTIONS The following options are supported:OPERANDS The following operands are suppor

sethttps(8)System Administration 203 In case the XSCF unit is duplicated configuration, the setting automaticallyreflected to the standby XSCF. When

Preface xviiSoftware LicenseThe function to explain in this manual uses the softwares of GPL,LGPL and others.For the information of the license, see A

sethttps(8)204 XSCF Reference Manual • Last Revised January 2007development, common: scf-host, e-mail: [email protected] 5 Creates the private ke

sethttps(8)System Administration 205EXIT STATUS The following exit values are returned:SEE ALSO showhttps(8)0 Successful completion.>0 An error occ

sethttps(8)206 XSCF Reference Manual • Last Revised January 2007

setldap(8)System Administration 207NAME setldap - configure the Service Processor as a Lightweight Directory Access Protocol(LDAP) clientSYNOPSIS setl

setldap(8)208 XSCF Reference Manual • Last Revised January 2007EXAMPLES EXAMPLE 1 Configuring Bind NameEXAMPLE 2 Configuring Base Distinguished NameEX

setldap(8)System Administration 209EXAMPLE 4 Setting the LDAP ServerEXAMPLE 5 Importing a CertificateEXAMPLE 6 Testing the LDAP connectionEXIT STATUS

setldap(8)210 XSCF Reference Manual • Last Revised January 2007

setlocale(8)System Administration 211NAME setlocale - set the default locale of the XSCFSYNOPSIS setlocale -s localesetlocale -hDESCRIPTION The setloc

setlocale(8)212 XSCF Reference Manual • Last Revised January 2007

setlocator(8)System Administration 213NAME setlocator - control the blinking of the CHECK LED on the operator panelSYNOPSIS setlocator valuesetlocator

xviii XSCF Reference Manual • November 2007Reader’s Comment Form

setlocator(8)214 XSCF Reference Manual • Last Revised January 2007EXIT STATUS The following exit values are returned:SEE ALSO showlocator(8)0 Successf

setlookup(8)System Administration 217NAME setlookup - enable or disable the use of the Lightweight Directory Access Protocol(LDAP) server for authenti

setlookup(8)218 XSCF Reference Manual • Last Revised January 2007

setnameserver(8)System Administration 219NAME setnameserver - set the domain name system (DNS) servers used in the XSCFnetworkSYNOPSIS setnameserver [

setnameserver(8)220 XSCF Reference Manual • Last Revised June 2007EXTENDEDDESCRIPTION If multiple DNS servers are specified, names are solved in the

setnetwork(8)System Administration 223NAME setnetwork - configure a network interface using by XSCFSYNOPSIS setnetwork [-m addr] interface addresssetn

setnetwork(8)224 XSCF Reference Manual • Last Revised June 2007OPERANDS The following operands are supported:

setnetwork(8)System Administration 225address Specifies an IP address. The specified value is a set of fourinteger values delimited by the period (.).

setnetwork(8)226 XSCF Reference Manual • Last Revised June 2007EXTENDEDDESCRIPTION When the XSCF unit is duplicated configuration in the high-end ser

setnetwork(8)System Administration 227EXAMPLE 4 Sets the IP address 192.168.10.128 on ISN on the XSCF unit 0. By default,255.255.255.0 is set for the

Preface xixFOLD AND TAPEFOLD AND TAPEBUSINESS REPLY MAILFIRST-CLASS MAIL PERMIT NO 741 SUNNYVALE CANO POSTAGE NECESSARYIF MAILEDIN THEUNITED STATESP

setnetwork(8)228 XSCF Reference Manual • Last Revised June 2007

setntp(8)System Administration 187NAME setntp - set the NTP information for XSCFSYNOPSIS setntp [-c add] address ...setntp -c del address ...setntp -c

setntp(8)188 XSCF Reference Manual • Last Revised November 2007OPERANDS The following operands are supported:EXTENDEDDESCRIPTION If multiple NTP serv

setntp(8)System Administration 189and 10.24.1.2.EXAMPLE 2 Deletes the NTP server 10.18.108.10.EXAMPLE 3 Adds the two NTP servers ntp1.examples.com and

setntp(8)190 XSCF Reference Manual • Last Revised November 2007

setpasswordpolicy(8)System Administration 233NAME setpasswordpolicy - manage the system password policySYNOPSIS setpasswordpolicy [-d dcredit][-e expi

setpasswordpolicy(8)234 XSCF Reference Manual • Last Revised November 2007-k difok Sets the minimum number of new characters (characters whichwere not

setpasswordpolicy(8)System Administration 235-k difok Sets the minimum number of new characters (characters whichwere not present in the old password)

setpasswordpolicy(8)236 XSCF Reference Manual • Last Revised November 2007EXAMPLES EXAMPLE 1 Setting the Minimum Size and Number of Passwords Remember

setpowerupdelay(8)System Administration 237NAME setpowerupdelay - set the warm-up time of the system and wait time before systemstartupSYNOPSIS setpow

xx XSCF Reference Manual • November 2007

setpowerupdelay(8)238 XSCF Reference Manual • Last Revised January 2007EXIT STATUS The following exit values are returned:SEE ALSO showpowerupdelay(8)

setprivileges(8)System Administration 241NAME setprivileges - assign user privilegesSYNOPSIS setprivileges user [ privileges][domainprivilege@ domains

setprivileges(8)242 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operands are supported:domainprivilege@domainsSpecifies do

setprivileges(8)System Administration 243EXAMPLES EXAMPLE 1 Setting Privileges for JSmithEXAMPLE 2 Removing All Privileges for JSmithEXIT STATUS The f

setprivileges(8)244 XSCF Reference Manual • Last Revised January 2007

setroute(8)System Administration 245NAME setroute - set routing information for an XSCF network interfaceSYNOPSIS setroute -c {add | del} -n address [

setroute(8)246 XSCF Reference Manual • Last Revised June 2007-h Displays usage statement. When used with other options oroperands, an error occurs.-m

setroute(8)System Administration 247OPERANDS The following operand is supported:EXTENDEDDESCRIPTION If the specified address is the same as the DSCP

setroute(8)248 XSCF Reference Manual • Last Revised June 2007EXAMPLE 4 Deletes the routing of destination 192.168.1.0 and default net mask(255.255.255

setshutdowndelay(8)System Administration 251NAME setshutdowndelay - set the shutdown wait time at power interruption of theuninterruptible power suppl

Intro(8)System Administration 1NAME Intro - eXtended System Control Facility (XSCF) man pagesDESCRIPTION This manual contains XSCF man pages.LIST OFCO

setshutdowndelay(8)252 XSCF Reference Manual • Last Revised January 2007

setsmtp(8)System Administration 253NAME setsmtp - set up the SMTP settingsSYNOPSIS setsmtp [-v]setsmtp [-s variable= value]...setsmtp -hDESCRIPTION se

setsmtp(8)254 XSCF Reference Manual • Last Revised January 2007OPTIONS The following options are supported:EXAMPLESEXAMPLE 1 Setting Up Mailserver and

setsmtp(8)System Administration 255EXAMPLE 4 Setting Up Mailserver With Invalid Authentication MechanismEXIT STATUS The following exit values are retu

setsmtp(8)256 XSCF Reference Manual • Last Revised January 2007

setsnmp(8)System Administration 257NAME setsnmp - manage the SNMP agentSYNOPSIS setsnmp enable [ mib_name]setsnmp disable [ mib_name]setsnmp addtrapho

setsnmp(8)258 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operands are supported:addtraphost Enables the SNMP agent to sen

setsnmp(8)System Administration 259addv3traphost Enables the SNMP agent to send SNMPv3 traps or informs tothe desired host. An authentication protocol

setsnmp(8)260 XSCF Reference Manual • Last Revised January 2007disable When used alone, stops the SNMP agent.When used with the value ALL for the opti

setsnmp(8)System Administration 261EXAMPLES EXAMPLE 1 Setting Up System InformationEXAMPLE 2 Setting Up and SNMPv3 Trap Host With Password OptionsEXAM

Intro(8)2 XSCF Reference Manual • Last Revised June 2006man display manual pages of specified XSCF shell commandmoveboard move an eXtended System Boar

setsnmp(8)262 XSCF Reference Manual • Last Revised January 2007SEE ALSO showsnmp(8)

setsnmpusm(8)System Administration 265NAME setsnmpusm - specify the SNMPv3 agent’s User-based Security Model (USM)configurationSYNOPSIS setsnmpusm cre

setsnmpusm(8)266 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operands are supported:clone Makes the supplied user known to

setsnmpusm(8)System Administration 267create Makes the supplied user known to the agent for subsequentSNMP communication. When used without the -a or

setsnmpusm(8)268 XSCF Reference Manual • Last Revised January 2007EXAMPLES EXAMPLE 1 Adding a User With Password OptionsEXAMPLE 2 Adding a User Withou

setsnmpvacm(8)System Administration 271NAME setsnmpvacm - modify the SNMPv3 agent’s View-based Access Control Model(VACM) configurationSYNOPSIS setsnm

setsnmpvacm(8)272 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operands are supported:EXAMPLESEXAMPLE 1 Create a Groupcreat

setsnmpvacm(8)System Administration 273EXAMPLE 2 Create a View of the Entire MIBEXAMPLE 3 Create a View Where the Subtree Is ExcludedEXAMPLE 4 Create

setsnmpvacm(8)274 XSCF Reference Manual • Last Revised January 2007

setssh(8)System Administration 275NAME setssh - set the SSH service used in the XSCF network. Also, generate the hostpublic key, and register or delet

Intro(8)System Administration 3man display manual pages of specified XSCF shell commandmoveboard move an eXtended System Board (XSB) from the currentd

setssh(8)276 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operand is supported:EXTENDEDDESCRIPTION When a host public key

setssh(8)System Administration 277EXAMPLES EXAMPLE 1 Starts the SSH service.EXAMPLE 2 Starts the SSH service. Automatically replies with 'y'

setssh(8)278 XSCF Reference Manual • Last Revised January 2007EXAMPLE 9 Registers the userpublic keyby specifyingthe username. Finishthe inputof publi

settelnet(8)System Administration 281NAME settelnet - start or stop the Telnet service used in the XSCF networkSYNOPSIS settelnet -c {enable | disable

settelnet(8)282 XSCF Reference Manual • Last Revised June 2007SEE ALSO rebootxscf(8), showtelnet(8)

settimezone(8)System Administration 285NAME settimezone - set the time zone and Daylight Saving Time of XSCFSYNOPSIS settimezone -c settz -s timezones

settimezone(8)286 XSCF Reference Manual • Last Revised January 2007-f date [/time] Specifies the starting time of Daylight Saving Time. You canspecify

settimezone(8)System Administration 287-f date [/time] Specifies the starting time of Daylight Saving Time. You canspecify date in any of the followin

settimezone(8)288 XSCF Reference Manual • Last Revised January 2007-o offset Specifies the offset of time zone and Greenwich mean time(GMT). You can s

settimezone(8)System Administration 289-p offset Specifies the offset of Daylight Saving Time and Greenwichmean time (GMT). You can specify offset in

Intro(8)4 XSCF Reference Manual • Last Revised June 2006setldap configure the Service Processor as a Lightweight DirectoryAccess Protocol (LDAP) clien

settimezone(8)290 XSCF Reference Manual • Last Revised January 2007EXTENDEDDESCRIPTION You cannot specify the years of validity for time zone and Day

settimezone(8)System Administration 291EXAMPLE 2 Lists the time zones that can be set.EXAMPLE 3 SetstheDaylightSavingTimeinformationasfollows:abbrevia

settimezone(8)292 XSCF Reference Manual • Last Revised January 2007

setupfru(8)System Administration 293NAME setupfru - set up device hardwareSYNOPSIS setupfru [-m {y | n}] [-x {1 | 4}] device locationsetupfru -hDESCRI

setupfru(8)294 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operands are supported:EXTENDEDDESCRIPTION In a high-end serve

setupplatform(8)System Administration 297NAME setupplatform - set up platform specific settingsSYNOPSIS setupplatform [-v]setupplatform [-v] -p part [

setupplatform(8)298 XSCF Reference Manual • Last Revised November 2007 XSCF Network Settings Internal DSCP Network Domain Name Service Network Tim

setupplatform(8)System Administration 299EXAMPLE 4 Configuring the Altitude.EXAMPLE 5 Setting the Time Zone.XSCF> setplatform -p altitudeDo you wan

setupplatform(8)300 XSCF Reference Manual • Last Revised November 2007EXIT STATUS The following exit values are returned:SEE ALSO adduser(8), applynet

showaltitude(8)System Administration 303NAME showaltitude - display the altitude state of the systemSYNOPSIS showaltitudeshowaltitude -hDESCRIPTION Th

Intro(8)System Administration 5showaudit display the current auditing system stateshowautologout display the session timeout time of the XSCF shellsho

showaltitude(8)304 XSCF Reference Manual • Last Revised January 2007

showarchiving(8)System Administration 305NAME showarchiving - display log archiving configuration and statusSYNOPSIS showarchivingshowarchiving [-e][-

showarchiving(8)306 XSCF Reference Manual • Last Revised January 20072. Time of the most recent attempt to connect to the archive host, and the outcom

showarchiving(8)System Administration 307EXAMPLES EXAMPLE 1 Viewing Status and Configuration DataEXAMPLE 2 Displaying Archiving Error InformationEXIT

showarchiving(8)308 XSCF Reference Manual • Last Revised January 2007

showaudit(8)System Administration 309NAME showaudit - display the current auditing system stateSYNOPSIS showauditshowaudit [all]showaudit [-a users][-

showaudit(8)310 XSCF Reference Manual • Last Revised June 2007OPTIONS The following options are supported:-a users Displays the audit record generatio

showaudit(8)System Administration 311OPERANDS The following operands are supported:EXAMPLESEXAMPLE 1 Displaying Auditing StatusEXAMPLE 2 Displaying Al

showaudit(8)312 XSCF Reference Manual • Last Revised June 2007EXIT STATUS The following exit values are returned:SEE ALSO setaudit(8), viewaudit(8)AEV

showautologout(8)System Administration 315NAME showautologout - display the session timeout time of the XSCF shellSYNOPSIS showautologoutshowautologou

Intro(8)6 XSCF Reference Manual • Last Revised June 2006showlogs display the specified logshowlookup display the configuration for authentication and

showautologout(8)316 XSCF Reference Manual • Last Revised January 2007

showboards(8)System Administration 317NAME showboards - display information on an extended system board (XSB)SYNOPSIS showboards [-v] -a [-c sp]showbo

showboards(8)318 XSCF Reference Manual • Last Revised January 2007When the -v option is specified, the following types of information are displayedas

showboards(8)System Administration 319Privileges You must have one of the following privileges to run this command:Refer to setprivileges(8) for more

showboards(8)320 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Displays detailed information on all mounted system boards.EXAMPLE 3 Displ

showcod(8)System Administration 323NAME showcod - display Capacity on Demand (COD) configuration informationSYNOPSIS showcod [-v][-d domain_id]showcod

showcod(8)324 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Displaying All COD InformationThe output shown is what you would see if you h

showcodlicense(8)System Administration 327NAME showcodlicense - display the current Capacity on Demand (COD) right-to-use(RTU) licenses stored in the

showcodlicense(8)328 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Displaying Raw License DataEXIT STATUS The following exit values are r

showcodusage(8)System Administration 331NAME showcodusage - display the current usage statistics for Capacity on Demand (COD)resourcesSYNOPSIS showcod

Intro(8)System Administration 7snapshot collect and transfer environment, log, error, and FRUIDdataswitchscf switch the XSCF unit between the active a

showcodusage(8)332 XSCF Reference Manual • Last Revised June 2007EXTENDEDDESCRIPTIONThe showcodusage -p resource command displays the following COD us

showcodusage(8)System Administration 333EXAMPLES Users with platform administrator privileges can view both resource and domainusage summaries. Users

showcodusage(8)334 XSCF Reference Manual • Last Revised June 2007EXAMPLE 3 Displaying COD Usage by Resource and Domain: M8000 Server WithCMU00 Quad-XS

showcodusage(8)System Administration 335EXIT STATUS The following exit values are returned:SEE ALSO addcodlicense(8), deletecodlicense(8), showcodlice

showcodusage(8)336 XSCF Reference Manual • Last Revised June 2007

showconsolepath(8)System Administration 337NAME showconsolepath - displays information on the domain console that is currentlyconnectedSYNOPSIS showco

showconsolepath(8)338 XSCF Reference Manual • Last Revised January 2007EXTENDEDDESCRIPTIONOnly one writable console and one or more read-only consoles

showdate(8)System Administration 341NAME showdate - display the date and time of XSCFSYNOPSIS showdate [-u]showdate -hDESCRIPTION The showdate(8) comm

showdate(8)342 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Displays the current time in UTC.EXIT STATUS The following exit values are r

showdcl(8)System Administration 277NAME showdcl - display the current domain component list (DCL)SYNOPSIS showdcl [-v] -ashowdcl [-v] -d domain_id [-l

SPARC®EnterpriseM4000/M5000/M8000/M9000Servers XSCF Reference ManualXSCF Control Package (XCP) 106xPart No. 819-7896-12November 2007, Revision AOrder

Intro(8)8 XSCF Reference Manual • Last Revised June 2006

showdcl(8)278 XSCF Reference Manual • Last Revised November 2007The showdcl(8) command can display the following information that is part of adomain c

showdcl(8)System Administration 279If the -v option is specified, the following information is added:Privileges You must have one of the following pri

showdcl(8)280 XSCF Reference Manual • Last Revised November 2007OPTIONS The following options are supported:.EXTENDEDDESCRIPTION A system board for w

showdcl(8)System Administration 281EXAMPLE 2 Displays details in the domain component list that is set for domain ID 0.XSCF> showdcl -v -d 0DID L

showdcl(8)282 XSCF Reference Manual • Last Revised November 2007EXAMPLE 3 Displays details in the domain component lists that are set for all domains.

showdevices(8)System Administration 353NAME showdevices - display current information on an eXtended System Board (XSB)SYNOPSIS showdevices [-v][-p by

showdevices(8)354 XSCF Reference Manual • Last Revised January 2007When memory is being disconnected, the following items are displayed:I/O devices:Pr

showdevices(8)System Administration 355OPERANDS The following operand is supported:-p force Predicts system resources deleted from the operating syste

showdevices(8)356 XSCF Reference Manual • Last Revised January 2007EXAMPLES EXAMPLE 1 Displays theinformation of the physical devices configured on th

showdevices(8)System Administration 357EXAMPLE 2 Displays detail information of the physical devices and their available re-sources in domain ID 0.EXI

addboard(8)System Administration 9NAME addboard - configure an eXtended System Board(XSB) into the domainconfiguration or assign it to the domain conf

showdevices(8)358 XSCF Reference Manual • Last Revised January 2007

showdomainmode(8)System Administration 359NAME showdomainmode - display the domain modeSYNOPSIS showdomainmode -d domain_idshowdomainmode -hDESCRIPTIO

showdomainmode(8)360 XSCF Reference Manual • Last Revised June 2007EXTENDEDDESCRIPTION If the Mode switch on the operator panel is set to "Servi

showdomainstatus(8)System Administration 291NAME showdomainstatus - display the current domain component list (DCL)SYNOPSIS showdomainstatus -d domain

showdomainstatus(8)292 XSCF Reference Manual • Last Revised November 2007Refer to setprivileges(8) for more information.OPTIONS The following options

showdscp(8)System Administration 367NAME showdscp - display the IP addresses assigned to the Domain to Service ProcessorCommunications Protocol (DSCP)

showdscp(8)368 XSCF Reference Manual • Last Revised January 2007OPTIONS The following options are supported:EXAMPLESCaution – The IP addresses shown i

showdscp(8)System Administration 369EXAMPLE 1 Displaying a Table of All DSCP IP AddressesEXAMPLE 2 Displaying a Specific Domain’s IP AddressEXAMPLE 3

showdscp(8)370 XSCF Reference Manual • Last Revised January 2007EXAMPLE 4 Displaying All DSCP Address Information In a Parsable FormEXIT STATUS The fo

showdualpowerfeed(8)System Administration 373NAME showdualpowerfeed - display the current setting of dual power feed modeSYNOPSIS showdualpowerfeedsho

addboard(8)10 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operand is supported:EXTENDEDDESCRIPTION When the command is ex

showdualpowerfeed(8)374 XSCF Reference Manual • Last Revised January 2007

showemailreport(8)System Administration 375NAME showemailreport - display the email report configuration dataSYNOPSIS showemailreport [-v ]showemailre

showemailreport(8)376 XSCF Reference Manual • Last Revised June 2007

showenvironment(8)System Administration 293NAME showenvironment - display the intake air temperature and humidity, temperaturesensor information, volt

showenvironment(8)294 XSCF Reference Manual • Last Revised November 2007EXTENDEDDESCRIPTIONFor some systems, voltage margin is set for each entire sys

showenvironment(8)System Administration 295EXAMPLE 3 Displays voltage information about each component.EXAMPLE 4 Displays voltage information about ea

showenvironment(8)296 XSCF Reference Manual • Last Revised November 2007EXAMPLE 5 Displays fan rotation information.EXIT STATUS The following exit val

showfru(8)System Administration 383NAME showfru - display the hardware settings of specified deviceSYNOPSIS showfru device locationshowfru -a devicesh

showfru(8)384 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operands are supported:EXTENDEDDESCRIPTIONThe setupfru(8) comman

showhardconf(8)System Administration 299NAME showhardconf - display information about field replaceable unit (FRU) installed inthe systemSYNOPSIS show

addboard(8)System Administration 11 See the setdcl(8) and showdcl(8) commands for DCL.EXAMPLESEXAMPLE 1 Configures XSB#00-0, #01-0, #02-0, and #03-0

showhardconf(8)300 XSCF Reference Manual • Last Revised November 2007EXTENDEDDESCRIPTIONWhen the configuration and status information regarding FRUs a

showhardconf(8)System Administration 301 + Type:1B; Size:1 GB; MEM#1B Status:Normal;+ Code:c1000000000000004572T128000HR3.7A

showhardconf(8)302 XSCF Reference Manual • Last Revised November 2007 + Type:1B; Size:1 GB; MEM#1B Status:Normal;+ Code:c100

showhardconf(8)System Administration 303EXAMPLE 2 Displays the number of installed FRUs in SPARC Enterprise M9000.+ FRU-Part-Number:CF00300-2001 02

showhardconf(8)304 XSCF Reference Manual • Last Revised November 2007EXIT STATUS The following exit values are returned: | PSU

showhostname(8)System Administration 393NAME showhostname - display the current host name for the XSCF unitSYNOPSIS showhostname {-a | xscfu}showhostn

showhostname(8)394 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Displays the host name for XSCF unit 0.EXIT STATUS The following exit va

showhttps(8)System Administration 397NAME showhttps - display the status of the HTTPS service set for the XSCF networkSYNOPSIS showhttpsshowhttps -hDE

showhttps(8)398 XSCF Reference Manual • Last Revised January 2007EXAMPLES EXAMPLE 1 Displays the status of the HTTPS service.EXIT STATUS The following

showldap(8)System Administration 401NAME showldap - display the Lightweight Directory Access Protocol (LDAP)configuration for the Service ProcessorSYN

addboard(8)12 XSCF Reference Manual • Last Revised January 2007

showldap(8)402 XSCF Reference Manual • Last Revised June 2007

showlocale(8)System Administration 403NAME showlocale - display the current setting for the XSCF localeSYNOPSIS showlocaleshowlocale -hDESCRIPTION The

showlocale(8)404 XSCF Reference Manual • Last Revised January 2007

showlocator(8)System Administration 405NAME showlocator - display the state of the CHECK LED on the operator panelSYNOPSIS showlocatorshowlocator -hDE

showlocator(8)406 XSCF Reference Manual • Last Revised January 2007

showlogs(8)System Administration 407NAME showlogs - display the specified logSYNOPSIS showlogs [-t time [-T time]|-p timestamp][-v | -V | -S][-r][-M]

showlogs(8)408 XSCF Reference Manual • Last Revised January 2007OPTIONS The following options are supported:-d domain_id Specifies the number of a dom

showlogs(8)System Administration 409-t time Specifies the start date and time of the display range for logdata. It is specified in one of the followin

showlogs(8)410 XSCF Reference Manual • Last Revised January 2007-T time Specifies the end date and time of the display range for log data.It is specif

showlogs(8)System Administration 411OPERANDS The following operands are supported:EXTENDEDDESCRIPTIONLogs are displayed in the following formats: Err

addcodlicense(8)System Administration 13NAME addcodlicense - add a Capacity on Demand (COD) right-to-use (RTU) license key tothe COD license databaseS

showlogs(8)412 XSCF Reference Manual • Last Revised January 2007Case where the -V option is specifiedCase where the -S option is specifiedDate: Mar 30

showlogs(8)System Administration 413 Power logStatus: Error statusEither of the following is displayed:Warning Partial degradation of the unit or war

showlogs(8)414 XSCF Reference Manual • Last Revised January 2007 Event logDefaultDate: Log collection date and time (month day hour:minute:secondtime

showlogs(8)System Administration 415Case where the -v option is specified TEMPERATURE AND HUMIDITY RECORDDate MessageMar 30

showlogs(8)416 XSCF Reference Manual • Last Revised January 2007 Monitoring message logEach line of display has a date and time paired with a monitor

showlogs(8)System Administration 417The time in the displayed log collection date and time (month dayhour:minute:second time-zone year) is the local t

showlogs(8)418 XSCF Reference Manual • Last Revised January 2007The time in the displayed log collection date and time (month dayhour:minute:second ti

showlogs(8)System Administration 419EXAMPLE 4 Displays a power log.EXAMPLE 5 Displays a power log in the order of timestamps, starting from the latest

showlogs(8)420 XSCF Reference Manual • Last Revised January 2007Note: The codes or messages shown here may differ from those actually displayed.EXIT S

showlookup(8)System Administration 423NAME showlookup - display the configuration for authentication and privileges lookupSYNOPSIS showlookupshowlooku

addcodlicense(8)14 XSCF Reference Manual • Last Revised June 2007

showlookup(8)424 XSCF Reference Manual • Last Revised January 2007

showmonitorlog(8)System Administration 425NAME showmonitorlog - display the contents of monitoring messages in real timeSYNOPSIS showmonitorlogshowmon

showmonitorlog(8)426 XSCF Reference Manual • Last Revised January 2007

shownameserver(8)System Administration 427NAME shownameserver - display the registered domain name system (DNS) serversspecified on the XSCF networkSY

shownameserver(8)428 XSCF Reference Manual • Last Revised January 2007

shownetwork(8)System Administration 429NAME shownetwork - display information of network interfaces for XSCFSYNOPSIS shownetwork [-M]{-a | -i | interf

shownetwork(8)430 XSCF Reference Manual • Last Revised June 2007OPERANDS The following operands are supported:interface Specifies the network interfac

shownetwork(8)System Administration 431EXTENDEDDESCRIPTION When the XSCF unit is duplicated configuration in the high-end server, atakeover IP addres

shownetwork(8)432 XSCF Reference Manual • Last Revised June 2007EXAMPLE 4 Displays the information for XSCF-LAN#0 on XSCF Unit 0.EXAMPLE 5 Displays th

shownetwork(8)System Administration 433server.EXIT STATUS The following exit values are returned:SEE ALSO applynetwork(8), setnetwork(8)XSCF> shown

addfru(8)System Administration 15NAME addfru - add a Field Replaceable Unit (FRU)SYNOPSIS addfruaddfru -hDESCRIPTION The addfru(8) command adds an FRU

shownetwork(8)434 XSCF Reference Manual • Last Revised June 2007

shownotice(8)System Administration 435NAME shownotice - display copyright and license information for the eXtended SystemControl Facility (XSCF) Contr

shownotice(8)436 XSCF Reference Manual • Last Revised January 2007

showntp(8)System Administration 351NAME showntp - display the NTP information which currently set for XSCFSYNOPSIS showntp {-l | -a | address | -s}sho

showntp(8)352 XSCF Reference Manual • Last Revised November 2007EXAMPLES EXAMPLE 1 Displays all NTP servers being currently set.EXAMPLE 2 Confirms syn

showpasswordpolicy(8)System Administration 441NAME showpasswordpolicy - display the current password settingsSYNOPSIS showpasswordpolicyshowpasswordpo

showpasswordpolicy(8)442 XSCF Reference Manual • Last Revised January 2007

showpowerupdelay(8)System Administration 443NAME showpowerupdelay - display the current settings for the warm-up time of thesystem and wait time befor

showpowerupdelay(8)444 XSCF Reference Manual • Last Revised January 2007

showresult(8)System Administration 445NAME showresult - display the exit status of the most recently executed commandSYNOPSIS showresultshowresult -hD

addfru(8)16 XSCF Reference Manual • Last Revised January 2007

showresult(8)446 XSCF Reference Manual • Last Revised January 2007

showroute(8)System Administration 447NAME showroute - display routing information for an XSCF network interfaceSYNOPSIS showroute [-M][-n]{-a | interf

showroute(8)448 XSCF Reference Manual • Last Revised June 2007OPERANDS The following operand is supported:EXTENDEDDESCRIPTIONThe setroute(8) command s

showroute(8)System Administration 449EXAMPLE 2 Displaysrouting information for XSCF-LAN#0onXSCFunit 0 without thename resolution of host name.EXAMPLE

showroute(8)450 XSCF Reference Manual • Last Revised June 2007

showshutdowndelay(8)System Administration 451NAME showshutdowndelay - display the shutdown wait time at power interruption of theuninterruptible power

showshutdowndelay(8)452 XSCF Reference Manual • Last Revised January 2007

showsmtp(8)System Administration 453NAME showsmtp - display the SMTP configuration informationSYNOPSIS showsmtpshowsmtp [ -v ]showsmtp -hDESCRIPTION s

showsmtp(8)454 XSCF Reference Manual • Last Revised January 2007

showsnmp(8)System Administration 455NAME showsnmp - display the configuration information and current status of the SNMPagentSYNOPSIS showsnmpshowsnmp

adduser(8)System Administration 17NAME adduser - create an XSCF user accountSYNOPSIS adduser [-u UID] useradduser -hDESCRIPTION adduser(8) creates a n

showsnmp(8)456 XSCF Reference Manual • Last Revised January 2007EXAMPLE 3 Displaying SNMP Information for a Enabled System Set Up WithSNMPv1/v2c Trap

showsnmpusm(8)System Administration 459NAME showsnmpusm - display the current User-based Security Model (USM) informationfor the SNMP agentSYNOPSIS sh

showsnmpusm(8)460 XSCF Reference Manual • Last Revised January 2007

showsnmpvacm(8)System Administration 461NAME showsnmpvacm - display the current View-based Access Control Access (VACM)information for the SNMP agentS

showsnmpvacm(8)462 XSCF Reference Manual • Last Revised January 2007

showssh(8)System Administration 463NAME showssh - display the status, host public keys, fingerprint, or user public keys of theSSH service configured

showssh(8)464 XSCF Reference Manual • Last Revised January 2007EXTENDEDDESCRIPTION You can specify the automatically-numbered user public key number

showssh(8)System Administration 465EXAMPLE 2 Displays the user public key of the current login user account.EXIT STATUS The following exit values are

showssh(8)466 XSCF Reference Manual • Last Revised January 2007

showstatus(8)System Administration 467NAME showstatus - display the degraded Field Replaceable Units (FRUs)SYNOPSIS showstatus [-M]showstatus -hDESCRI

PleaseRecycleCopyright2007SunMicrosystems,Inc.,4150NetworkCircle,SantaClara,California95054,U.S.A.andFUJITSULIMITED,1-1,Kamikodanaka4-chome,Nakahara-k

adduser(8)18 XSCF Reference Manual • Last Revised November 2007EXAMPLES EXAMPLE 1 Creating a New UserEXIT STATUS The following exit values are returne

showstatus(8)468 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Displaysthedegradedunits.Inthisexample,amemorymodule ona mem-ory board is

showtelnet(8)System Administration 471NAME showtelnet - display the current status of the Telnet service for the XSCF networkSYNOPSIS showtelnetshowte

showtelnet(8)472 XSCF Reference Manual • Last Revised January 2007

showtimezone(8)System Administration 473NAME showtimezone - display the XSCF time zone and Daylight Saving Time informationof current settingsSYNOPSIS

showtimezone(8)474 XSCF Reference Manual • Last Revised January 2007offset2 Offset time of Daylight Saving Time and Greenwich mean time(GMT).Displayed

showtimezone(8)System Administration 475offset2 Offset time of Daylight Saving Time and Greenwich mean time(GMT).Displayed in minus "–" in c

showtimezone(8)476 XSCF Reference Manual • Last Revised January 2007Privileges You must have one of the following privileges to run this command:usera

showtimezone(8)System Administration 477EXTENDEDDESCRIPTIONThe settimezone(8) command sets the time zone of the XSCF.EXAMPLESEXAMPLE 1 Displays the ti

showtimezone(8)478 XSCF Reference Manual • Last Revised January 2007

showuser(8)System Administration 479NAME showuser - display user account informationSYNOPSIS showusershowuser [[-a][-M][-p][-u][user]]showuser [[-a][-

applynetwork(8)System Administration 21NAME applynetwork - reflect the information that has been set for the XSCF networkSYNOPSIS applynetwork [[-q] -

showuser(8)480 XSCF Reference Manual • Last Revised January 2007EXAMPLES EXAMPLE 1 Displays Password and Account Validity InformationEXAMPLE 2 Display

snapshot(8)System Administration 483NAME snapshot - collect and transfer environment, log, error, and FRUID dataSYNOPSIS snapshot -d device [-r][-e [-

snapshot(8)484 XSCF Reference Manual • Last Revised January 2007Every .zip archive generated by snapshot includes two files generated bysnapshot itsel

snapshot(8)System Administration 485-k host-key Used with the -t or -T option, sets the public key that theService Processor uses to log in to the net

snapshot(8)486 XSCF Reference Manual • Last Revised January 2007-k host-key Used with the -t or -T option, sets the public key that theService Process

snapshot(8)System Administration 487-p password Specifies the user password used to log in to the host usingSSH. This option is valid with the -t opti

snapshot(8)488 XSCF Reference Manual • Last Revised January 2007EXTENDEDDESCRIPTIONModes of OperationThe following is a brief overview of the modes of

snapshot(8)System Administration 489EXAMPLE 3 Downloading With a User-Provided Public KeyEXAMPLE 4 Log Files Only Using No Public KeyEXAMPLE 5 Downloa

snapshot(8)490 XSCF Reference Manual • Last Revised January 2007EXAMPLE 8 Downloading Public Key and Answering No to All PromptsEXAMPLE 9 Downloading

switchscf(8)System Administration 387NAME switchscf - switch the XSCF unit between the active and standby statesSYNOPSIS switchscf [[-q] -{y|n}] -t {A

applynetwork(8)22 XSCF Reference Manual • Last Revised June 2007 Unless all of the host name, DNS domain name, IP address, net mask, androuting setti

switchscf(8)388 XSCF Reference Manual • Last Revised November 2007EXTENDEDDESCRIPTIONWhen the command is executed, a prompt to confirm execution of th

testsb(8)System Administration 495NAME testsb - perform an initial diagnosis of the specified physical system board (PSB)SYNOPSIS testsb [[-q] -{y|n}]

testsb(8)496 XSCF Reference Manual • Last Revised January 2007OPTIONS The following options are supported:.OPERANDS The following operand is supported

testsb(8)System Administration 497 XSB is installed in the domain and this domain is power ON status, powerOFF status, or reset status. The addboard

testsb(8)498 XSCF Reference Manual • Last Revised January 2007EXAMPLES EXAMPLE 1 Performs the initial diagnosis on PSB#00.EXAMPLE 2 Performs an initia

testsb(8)System Administration 499mounted.EXIT STATUS The following exit values are returned:SEE ALSO addfru(8), deletefru(8), replacefru(8), setupfru

testsb(8)500 XSCF Reference Manual • Last Revised January 2007

unlockmaintenance(8)System Administration 501NAME unlockmaintenance - forcibly release the locked status of XSCFSYNOPSIS unlockmaintenance [[-q] -{y|n

unlockmaintenance(8)502 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Unlocks the maintenance lock status. Automatically answers "y&

version(8)System Administration 505NAME version - display firmware versionSYNOPSIS version -c xcp [-v][-t]version -c {cmu | xscf}[-v]version -hDESCRIP

applynetwork(8)System Administration 23On a high-end server:The case of high-end server.XSCF> applynetworkThe following network settings will be ap

version(8)506 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Displays the details of the XCP version.EXAMPLE 3 Displays the XCP version th

version(8)System Administration 507EXAMPLE 6 Displays the detailed version of OpenBoot PROM firmware.EXAMPLE 7 Displays the version of XSCF firmware.E

version(8)508 XSCF Reference Manual • Last Revised January 2007

viewaudit(8)System Administration 509NAME viewaudit - display audit recordsSYNOPSIS viewauditviewaudit [-A date-time][-B date-time ][-C][-c classes][-

viewaudit(8)510 XSCF Reference Manual • Last Revised June 2007-B date-time Selects records that occurred before date-time. The date-timeargument is in

viewaudit(8)System Administration 511-B date-time Selects records that occurred before date-time. The date-timeargument is in local time. the -A and -

viewaudit(8)512 XSCF Reference Manual • Last Revised June 2007-c classes Selects records in indicated classes. classes is a comma-separated list of au

viewaudit(8)System Administration 513-e events Selects records of the indicated events. events is a comma-separated list of audit events. An event may

viewaudit(8)514 XSCF Reference Manual • Last Revised June 2007EXAMPLES EXAMPLE 1 Displaying Audit Records for December 12, 2005EXAMPLE 2 Displaying Us

viewaudit(8)System Administration 515EXAMPLE 5 Displaying Audit Records Within a Range of Two DaysEXAMPLE 6 Displaying First 5 Records (of 70) that Ma

applynetwork(8)24 XSCF Reference Manual • Last Revised June 2007EXAMPLE 2 On the midrange server, reflects the information that has been set for theXS

viewaudit(8)516 XSCF Reference Manual • Last Revised June 2007

who(1)System Administration 517NAME who - display a list of the user accounts who are logged in to the XSCFSYNOPSIS whowho -hDESCRIPTION who(1) displa

who(1)518 XSCF Reference Manual • Last Revised January 2007

Herausgegeben von / Published byFujitsu Siemens Computers GmbH*U41682-J-Z816-3-76 *U41682-J-Z816-3-76 Bestell-Nr./ Order No.:U41682-J-Z816-3-76

cfgdevice(8)System Administration 27NAME cfgdevice - connect the CD-RW/DVD-RW drive unit and the tape drive unit to theport, disconnect it from the po

cfgdevice(8)28 XSCF Reference Manual • Last Revised June 2007The current status of the drive that is displayed with this command includes thefollowing

cfgdevice(8)System Administration 29OPTIONS The following options are supported:EXTENDEDDESCRIPTION When the command is executed, a prompt to confirm

cfgdevice(8)30 XSCF Reference Manual • Last Revised June 2007 The DVD drive/tape drive unit is mounted in each of the base and expansioncabinets in a

cfgdevice(8)System Administration 31EXAMPLE 4 Displays the status of individual DVD drive/tape drive unit set (withoutthe expansion cabinet).EXAMPLE 5

Copyright2007Sun Microsystems, Inc.,4150NetworkCircle,SantaClara,California95054,U.S.A.etFUJITSULIMITED,1-1,Kamikodanaka4-chome,Nakahara-ku, Kawasaki-

cfgdevice(8)32 XSCF Reference Manual • Last Revised June 2007

console(8)System Administration 33NAME console - connect to a domain consoleSYNOPSIS console [[-q] -{y|n}] -d domain_id [-f | -r][-s escapeChar]consol

console(8)34 XSCF Reference Manual • Last Revised June 2007EXTENDEDDESCRIPTION When the command is executed, a prompt to confirm execution of the com

clockboard(8)System Administration 37NAME clockboard - Set or display the clock control unit used at system startupSYNOPSIS clockboardclockboard -s CL

clockboard(8)38 XSCF Reference Manual • Last Revised June 2007

deleteboard(8)System Administration 39NAME deleteboard - disconnect an eXtended System Board (XSB) from the domainconfigurationSYNOPSIS deleteboard [[

deleteboard(8)40 XSCF Reference Manual • Last Revised January 2007OPTIONS The following options are supported.OPERANDS The following operand is suppor

deleteboard(8)System Administration 41 If "-c disconnect" is specified when either the domain power has been turnedoff or the XSB is alread

deleteboard(8)42 XSCF Reference Manual • Last Revised January 2007

deletecodlicense(8)System Administration 43NAME deletecodlicense - remove a Capacity on Demand (COD) right-to-use (RTU) licensekey from the COD licens

deletecodlicense(8)44 XSCF Reference Manual • Last Revised June 2007SEE ALSO addcodlicense(8), setcod(8), showcod(8), showcodlicense(8),showcodusage(8

deletefru(8)System Administration 47NAME deletefru - delete a Field Replaceable Unit (FRU)SYNOPSIS deletefrudeletefru -hDESCRIPTION The deletefru(8) c

deletefru(8)48 XSCF Reference Manual • Last Revised January 2007

deleteuser(8)System Administration 49NAME deleteuser - delete an XSCF user accountSYNOPSIS deleteuser userdeleteuser -hDESCRIPTION deleteuser(8) delet

deleteuser(8)50 XSCF Reference Manual • Last Revised January 2007

disableuser(8)System Administration 51NAME disableuser - disable an XSCF user accountSYNOPSIS disableuser userdisableuser -hDESCRIPTION disableuser(8)

disableuser(8)52 XSCF Reference Manual • Last Revised January 2007

enableuser(8)System Administration 53NAME enableuser - enable an XSCF user accountSYNOPSIS enableuser userenableuser -hDESCRIPTION enableuser(8) enabl

enableuser(8)54 XSCF Reference Manual • Last Revised January 2007

exit(1)System Administration 55NAME exit - exit the XSCF shellSYNOPSIS exitDESCRIPTION The exit(1) command exits and closes the XSCF shell.Privileges

vContentsPreface ixIntro 2addboard 10addcodlicense 14addfru 16adduser 18applynetwork 22cfgdevice 28console 34clockboard 38deleteboard 40dele

exit(1)56 XSCF Reference Manual • Last Revised January 2007

flashupdate(8)System Administration 57NAME flashupdate - update the firmwareSYNOPSIS flashupdate -c check -m xcp -s versionflashupdate [[-q] -{y|n}] -

flashupdate(8)58 XSCF Reference Manual • Last Revised January 2007EXTENDEDDESCRIPTION When the command is executed, a prompt to confirm execution of

flashupdate(8)System Administration 59EXAMPLE 2 Updates the entire firmware to version from 1010 to 1020.EXAMPLE 3 When XSCF unit is duplicated config

flashupdate(8)60 XSCF Reference Manual • Last Revised January 2007

fmadm(8)System Administration 61NAME fmadm - fault management configuration toolSYNOPSIS fmadm [-q] configfmadm -hDESCRIPTION fmadm (8) can be used to

fmadm(8)62 XSCF Reference Manual • Last Revised January 2007EXAMPLES EXAMPLE 1 Displaying the Fault Manager ConfigurationEXIT STATUS The following exi

fmdump(8)System Administration 65NAME fmdump - view fault management logsSYNOPSIS fmdumpfmdump [-e][-f][-M][-v][-V][-c class][-t time][-T time][-u uui

fmdump(8)66 XSCF Reference Manual • Last Revised January 2007filter option is present on the command-line, the like options combine to displayany even

fmdump(8)System Administration 67The following are the Time Formats:-u uuid Selects fault diagnosis events that exactly match the specified uuid.Each

vi XSCF Reference Manual • November 2007man 98moveboard 102nslookup 108password 110poweroff 114poweron 120prtfru 124rebootxscf 128replacefru

fmdump(8)68 XSCF Reference Manual • Last Revised January 2007You can append a decimal fraction of the form .n to any -t option argument toindicate a f

fmdump(8)System Administration 69EXAMPLES EXAMPLE 1 Default fmdump DisplayEXAMPLE 2 Display in Verbose ModeEXAMPLE 3 Display Very Verbose Event Detail

fmdump(8)70 XSCF Reference Manual • Last Revised January 2007EXAMPLE 4 Displaying the Full Fault Report for the Specified UUIDXSCF> fmdump -V -u 5

fmdump(8)System Administration 71EXAMPLE 5 Displaying Contents of the Fault Manager syslog MessageEXIT STATUS The following exit values are returned:S

fmdump(8)72 XSCF Reference Manual • Last Revised January 2007

fmstat(8)System Administration 73NAME fmstat - report fault management module statisticsSYNOPSIS fmstat [-a][[-s][-z][-m module]] [ interval [ count]]

fmstat(8)74 XSCF Reference Manual • Last Revised January 2007 Privileges You must have platadm, platop, or fieldeng privileges to run this command.Ref

fmstat(8)System Administration 75OPERANDS The following operands are supported:If neither count nor interval is specified, a single report is printed

fmstat(8)76 XSCF Reference Manual • Last Revised January 2007EXAMPLE 2 Displaying FM Statistics for fmd Self-Diagnosis ModuleEXIT STATUS The following

getflashimage(8)System Administration 79NAME getflashimage - download a firmware image fileSYNOPSIS getflashimage [-v ][[-q] -{y|n} ][-u user ][-p pro

Contents viisetpowerupdelay 238setprivileges 242setroute 246setshutdowndelay 252setsmtp 254setsnmp 258setsnmpusm 266setsnmpvacm 272setssh 276

getflashimage(8)80 XSCF Reference Manual • Last Revised June 2007OPERANDS The following operands are supported:EXAMPLESEXAMPLE 1 Downloading a Version

getflashimage(8)System Administration 81EXAMPLE 2 Downloading a Version from an ftp ServerEXAMPLE 3 Downloading Using an http Proxy Server With Port 8

getflashimage(8)82 XSCF Reference Manual • Last Revised June 2007EXAMPLE 4 Downloading Using a User Name and PasswordEXAMPLE 5 Downloading From a USB

ioxadm(8)System Administration 85NAME ioxadm - manage External I/O Expansion UnitsSYNOPSIS ioxadm [-f][-p][-v][-M] env [-e][-l][-t][ target [ sensors]

ioxadm(8)86 XSCF Reference Manual • Last Revised January 2007OPERANDS The following operands are supported:-M Displays text by page. This option provi

ioxadm(8)System Administration 87Displays a summary of an External I/O Expansion Unit or link card’senvironmental state. -eDisplays electrical states

ioxadm(8)88 XSCF Reference Manual • Last Revised January 2007Displays a summary of an External I/O Expansion Unit or link card’senvironmental state.

ioxadm(8)System Administration 89Fields containing a dash (–) indicate an unsupported setting. For example,there may be no minimum temperature alarm t

ioxadm(8)90 XSCF Reference Manual • Last Revised January 2007Sets or queries the state of the locator indicator (LED).Without options, locator reports

ioxadm(8)System Administration 91Reinitializes FRU components used to monitor External I/O Expansion Unitenvironmentals. If a boat or link card is spe