Fujitsu SPARC ENTERPRISE M4000 Manual de usuario descargar pdf (Pagina 42)

100

101

applynetwork(8)

22 XSCF Reference Manual • Last Revised June 2007

■ Unless all of the host name, DNS domain name, IP address, net mask, and

routing settings have been made, it results in errors. Please execute the

sethostname(8), setnetwork(8), and setroute(8) command to set all items,

then reexecute the applynetwork(8) command.

■ To set to multiple interfaces, all of the host name, DNS domain name, IP address,

net mask, and routing settings need to be set on every interface. In these

interfaces, if any of these setting items omitted, it results in errors.

■ To specify a host name, use the sethostname(8) command. To specify an IP

address and net mask, use the setnetwork(8) command. To specify routing, use

the setroute(8) command.

EXAMPLES

EXAMPLE 1 Reflects the information that has been set for the XSCF network.

On a midrange server:

XSCF> applynetwork

The following network settings will be applied:

xscf#0 hostname :hostname-0

DNS domain name :example.com

nameserver :10.23.4.3

interface :xscf#0-lan#0

status :up

IP address :10.24.144.214

netmask :255.255.255.0

route :-n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1

interface :xscf#0-lan#1

status :down

IP address :

netmask :

route :

Continue? [y|n] :y

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 443 444

Comentarios a estos manuales

Sin comentarios

Fujitsu SPARC ENTERPRISE M4000 Manual de usuario Pagina 42

Comentarios a estos manuales

Relacionado con productos y manuales para Ordenadores Fujitsu SPARC ENTERPRISE M4000