Fujitsu SPARC M4000 Manual de usuario Pagina 82

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 376
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 81
2-26 SPARC Enterprise Mx000 Servers XSCF User’s Guide April 2008
Configuring XSCF Routing
<Example>
XSCF Unit 0 XSCF Unit 1
xscf#0 [192.168.1.10] xscf#2 [192.168.1.20]
+------------------------------+
XSCF-LAN#0 XSCF-LAN#0
XSCF Unit 0 XSCF Unit 1
xscf#1 [10.12.108.10] xscf#3 [10.12.108.20]
+------------------------------+
XSCF-LAN#1 XSCF-LAN#1
Destination Gateway Netmask Interface
[192.168.1.0] - [255.255.255.0] xscf#0
[default] [192.168.1.1] [0.0.0.0] xscf#0
[192.168.1.0] - [255.255.255.0] xscf#2
[default] [192.168.1.1] [0.0.0.0] xscf#2
[10.12.108.0] - [255.255.255.0] xscf#1
[default] [10.12.108.1] [0.0.0.0] xscf#1
[10.12.108.0] - [255.255.255.0] xscf#3
[default] [10.12.108.1] [0.0.0.0] xscf#3
Note – The method of determining the routing for an XSCF interface depends on
the network environment at the installation site. The network environment for
system operation must have a suitable configuration.
Command operation
1. Use the showroute (8) command to display the routing environment.
XSCF> showroute -a
Destination Gateway Netmask Flags Interface
10.12.108.0 * 255.255.255.0 U xscf#0-lan#0
default 10.12.108.1 0.0.0.0 UG xscf#0-lan#0
:
Vista de pagina 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 375 376

Comentarios a estos manuales

Sin comentarios