Fujitsu SPARC T5440 Manual de usuario descargar pdf (Pagina 119)

Servicing Customer-Replaceable Units 93

■ “PCIe Slot Configuration Guidelines” on page 97

■ “Performing Node Reconfiguration” on page 155

▼ Remove a PCIe Card

Before you begin, complete these tasks:

■ Read the section, “Safety Information” on page 59.

■ Power off the server, using one of the methods described in the section, “Powering

Off the System” on page 63.

■ “Extend the Server to the Maintenance Position” on page 66

■ “Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 69

■ “Remove the Top Cover” on page 69

Do the following :

1. Identify the PCIe card you want to remove.

2. Open the PCIe card latch.

FIGURE: Removing a PCIe Card

3. Remove the PCIe card the system.

4. Place the PCIe card on an antistatic mat.

5. If you are not replacing the PCIe card, install a PCIe filler panel in its place.

6. Close the PCIe card latch.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 213 214

Sin comentarios

Fujitsu SPARC T5440 Manual de usuario Pagina 119