Fujitsu SPARC T5440 Manual de usuario descargar pdf (Pagina 51)

Managing Faults 25

▼ Display Individual Component Information With

the ILOM show Command

Use the show command to display information about individual components in the

server.

● At the -> prompt, enter the show command.

In CODE EXAMPLE: show Command Output on page 25, the show command is

used to get information about a memory module (FB-DIMM).

/SYS/MB/PCIE2/ | component_state | Enabled

/SYS/MB/PCIE5/ | component_state | Enabled

/SYS/MB/NET0 | component_state | Enabled

/SYS/MB/NET1 | component_state | Enabled

/SYS/MB/NET2 | component_state | Enabled

/SYS/MB/NET3 | component_state | Enabled

/SYS/MB/PCIE | component_state | Enabled

CODE EXAMPLE: show Command Output

-> show /SYS/MB/CPU0/CMP0/BR1/CH0/D0

/SYS/MB/CPU0/CMP0/BR1/CH0/D0

Targets:

SEEPROM

SERVICE

PRSNT

T_AMB

Properties:

type = DIMM

component_state = Enabled

fru_name = 1024MB DDR2 SDRAM FB-DIMM 333 (PC2 5300)

fru_description = FBDIMM 1024 Mbyte

fru_manufacturer = Micron Technology

fru_version = FFFFFF

fru_part_number = 18HF12872FD667D6D4

fru_serial_number = d81813ce

fault_state = OK

clear_fault_action = (none)

CODE EXAMPLE: Output of the show components Command Showing Disabled Components (Continued)

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 213 214

Sin comentarios

Fujitsu SPARC T5440 Manual de usuario Pagina 51