Fujitsu SPARC T5440 Manual de usuario descargar pdf (Pagina 79)

Managing Faults 53

Note – In the ILOM shell there is no notification when the system is actually

powered off. Powering off takes about a minute. Use the show /HOST command to

determine if the host has powered off.

ILOM-to-ALOM CMT Command

Reference

TABLE: ALOM CMT Parameters and POST Modes on page 56 describes the typical

commands for servicing a server. For descriptions of all ALOM CMT commands,

issue the help command or refer to the following documents:

■ Integrated Lights Out Manager 3.0 Concepts Guide

■ Integrated Lights Out Manager 3.0 Supplement for SPARC Enterprise T5440 Server

TABLE: Service-Related Commands

ILOM Command ALOM CMT Command Description

help [command] help [command] Displays a list of all available

commands with syntax and

descriptions. Specifying a command

name as an option displays help for

that command.

set /HOST/send_break_action

true

break [-y][-c][-D]

• -y skips the confirmation

question.

• -c executes a console command

after the break command

completes.

• -D forces a core dump of the

Solaris OS.

Takes the host server from the OS to

either kmdb or OpenBoot PROM

(equivalent to a Stop-A), depending

on the mode Solaris software was

booted.

set

/SYS/component/clear_fault_a

ction true

clearfault UUID Manually clears host-detected

faults. The UUID is the unique fault

ID of the fault to be cleared.

start /SP/console console [-f]

• -f forces the console to have read

and write capabilities.

Connects you to the host system.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 213 214

Comentarios a estos manuales

Sin comentarios

Fujitsu SPARC T5440 Manual de usuario Pagina 79

Comentarios a estos manuales

Relacionado con productos y manuales para Ordenadores Fujitsu SPARC T5440